Basic Info.
Model |
160 |
230 |
280 |
350 |
Motor Capacity |
900W |
1200W |
1800W |
2200W |
Mixing Weight |
200KG |
250KG |
300KG |
350KG |
Total Weight |
60KG |
76KG |
82KG |
90KG |
Drum Diameter |
600mm |
650mm |
750mm |
Drum length |
580mm |
820mm |
Caliber |
370mm |
420mm |
Voltage |
220V 50-60Hz |
Transmission
Speed |
22r/min |
Product Parameters
350 MIXER
Mixer, is a kind of construction machinery, the main is used for mixing cement, sand, all kinds of dry powder mortar and other building materials. This is a machine in which a shaft with blades rotates in a cylinder or tank to stir and mix various ingredients into a mixture or suitable consistency. Mixer is divided into many kinds, there are forced mixer, single horizontal shaft mixer, double horizontal shaft mixer and so on.
Features
1.It is equipped with famous and excellent engines, with large torque reserve, strong power and low fuel consumption.
2.Full hydraulic steering system, flexible and light to operate.
3.Middle shift gear, easy to operate.
4.8+2 gear shift, reasonable speed matching, high working efficiency and strong adaptability.
5.The new miniature LCD instrument is developed according to the harsh working conditions of construction machinery and has high reliability.
REAL SCENE SHOOTING
Use safety
1, the mixer should be set in a flat position, with square wood cushion the front and rear axle, so that the tire is high, so as not to move around when starting.
2, the mixer should implement two level leakage protection, before work power on, must be carefully checked, through the empty car test deemed qualified, can be used. During the test run, it should be checked whether the speed of the mixing drum is suitable. Under normal circumstances, the empty car speed is slightly faster than the specific car (after loading) by 2 to 3 revolutions. If there is more difference, the ratio of the driving wheel and the driving wheel should be adjusted.
3, the rotation direction of the mixing drum should be in line with the direction indicated by the arrow, if not true, should be corrected motor wiring.
4. Check whether the transmission clutch and brake are flexible and reliable, whether the wire rope is damaged, whether the track pulley is good, and whether there is barrier-free and lubrication of various parts around it.
5. After starting up, often pay attention to whether the operation of the parts of the mixer is normal. When stopping, check whether the blade of the mixer is bent, and whether the screws are knocked or loosened.
6. When the concrete is finished mixing or is expected to stop for more than 1 hour, in addition to the remaining material, the stone and water should be poured into the shaking cylinder, the machine should be turned on, and the mortar stuck on the cylinder should be washed and discharged. There should be no water in the barrel to avoid rust of the barrel and blade. At the same time, the ash accumulation outside the mixing cylinder should be cleaned to keep the machine clean and intact.
7, after work and stop when not in use, should be switched off, and lock the switch box to ensure safety.
Company Profile
Qingdao Qingcha Machinery Manufacturing Co., Ltd. is located in the ash high-tech park of Xinhe Town, Pingdu City,Qingdao. It has been committed to the research and development and production of internal combustion counterbalanced forklifts, battery counterbalanced forklifts, OMV intelligent omnidirectional forklifts,wheel loader,mini dumper,mixer,backhoe loader,excavator ,tractor and mini digger.
Since its inception, the company has always been to build China's most cost-effective high-quality construction machinery for the purpose of continuous research and development and innovation, the company has large CNC cutting machine, vertical machining center, horizontal gantry milling machine and other equipment more than 40 sets, to achieve all the key components Self-made, providing a strong guarantee for the quality of the product.
For the long-term development of the company, the company regards the quality as the life of the company, establishes a perfect quality assurance system, and has passed the IS09001 international quality system certification.
In the near future, Qingdao Forklift will become one of the well-known R&D, production and export construction machinery bases in the industry, contributing to the prosperity of the domestic and international logistics market and the promotion of innovation and development in the construction machinery industry.