Basic Info.
| Model |
|
504 Wheel Tractor |
| Drive Type |
|
4WD/2WD |
| Overall MachineDimensions(length*width*height and location) |
mm |
2700*1100*1200 |
| Minimum ground clearance and location |
mm |
250(bottom of front axle) |
| rear axle |
/ |
TYE bridge (half shaft thickened to 60) |
| Minimum usage quality |
kg |
1650 |
| number of gears(forward/reverse) |
/ |
8+2 shuttle side gear |
| Maximum design theoretical speed |
km/h |
31.46 |
| Engine and main clutch connection method |
/ |
direct |
| type of rollover protection device(cab or safety frame) |
/ |
security framework |
| Engine model |
/ |
490 |
| Engine structure type |
/ |
In-line,direct injection,water-cooled,four-stroke |
| engine manufacturer |
/ |
weifang 50 Hp |
| engine air intake method |
/ |
inhale naturally |
| number of engine cylinders |
/ |
4 |
| engine standard power |
kw |
36.8 |
| engine standard speed |
r/min |
2400 |
| engine cooling method |
/ |
water cooling |
| steering system type |
/ |
fully hydraulic |
| steering system steering control mechanism |
/ |
steering wheel |
| steering system steering mechanism type |
/ |
front wheel steering |
| tyre model |
|
front wheel:600-12 rear wheel:9.5-16 |
| number of hydraulic output groups |
/ |
two |
| working device safety valve full opening pressure |
MPa |
17.5-18.0 |
| number of splinesof PTO shaft |
/ |
6 |
| PTO shaft standard speed |
R/min |
540/720 |
Differences from ordinary tractors
1. Volume size
Low-profile tractors are smaller than ordinary tractors and can easily operate in narrow greenhouses without damaging vegetation.
2. Mobility
Low-profile tractors are more maneuverable than ordinary tractors and can adapt well to the complex terrain and environment in the greenhouse. They can flexibly change direction and speed to ensure operating efficiency and quality.
3. Adaptability
Compared with ordinary tractors, low-profile tractors are more suitable for special working places such as greenhouses and greenhouses, and can be used for various operational needs, such as irrigation, plowing, spraying, fertilizing, transportation, etc. Ordinary tractors are suitable for a wider range of working sites and fields.
Features
1.It is equipped with famous and excellent engines, with large torque reserve, strong power and low fuel consumption.
2.Full hydraulic steering system, flexible and light to operate.
3.Middle shift gear, easy to operate.
4.8+2 gear shift, reasonable speed matching, high working efficiency and strong adaptability.
5.The new miniature LCD instrument is developed according to the harsh working conditions of construction machinery and has high reliability.
REAL SCENE SHOOTING
Although the tractor is a more complex machine, its type and size are different, but they are composed of three parts of the engine, chassis and electrical equipment, each of which is indispensable.
Tractor engine
It is the device that generates the power of the tractor, and its role is to convert the heat energy of the fuel into mechanical energy to output power. Most of the farm tractors produced use diesel engines.
Tractor chassis
It is the device that transmits power to the tractor. Its role is to transfer the power of the engine to the driving wheel and the working device to make the tractor travel, and to complete the mobile operation or fixed role. This function is achieved through the mutual cooperation and coordination of the transmission system, walking system, steering system, braking system and working device, and at the same time, they constitute the skeleton and body of the tractor. Therefore, we refer to the above four systems and one device as chassis. That is to say, in the whole of the tractor, all other systems and devices other than the engine and electrical equipment are collectively referred to as the tractor chassis.
Tractor electrical equipment
It is a device to ensure that the tractor uses electricity. Its role is to solve lighting, safety signals and engine starting.
Qingdao Qingcha Machinery Manufacturing Co., Ltd. is located in the ash high-tech park of Xinhe Town, Pingdu City,Qingdao. It has been committed to the research and development and production of internal combustion counterbalanced forklifts, battery counterbalanced forklifts, OMV intelligent omnidirectional forklifts,wheel loader,mini dumper,mixer,backhoe loader,excavator ,tractor and mini digger.
Since its inception, the company has always been to build China's most cost-effective high-quality construction machinery for the purpose of continuous research and development and innovation, the company has large CNC cutting machine, vertical machining center, horizontal gantry milling machine and other equipment more than 40 sets, to achieve all the key components Self-made, providing a strong guarantee for the quality of the product.
For the long-term development of the company, the company regards the quality as the life of the company, establishes a perfect quality assurance system, and has passed the IS09001 international quality system certification.
In the near future, Qingdao Forklift will become one of the well-known R&D, production and export construction machinery bases in the industry, contributing to the prosperity of the domestic and international logistics market and the promotion of innovation and development in the construction machinery industry.
1.What services would you offer if I buy from you?
Our trained Professional service team offers high-quality in-time service in a very friendly way. For a good customer.
2.Can you supply the machine with your customer requirement?
We have strong technology team, are able to do adjustment design for customers according to users' most requirements.
3.Are you the factory?
Yes, the factory Founded in 2015 year.
Location at: Intersection of Huibu Xingye Avenue and Xingguang Avenue in Xinhe Town, Pingdu City, Qingdao.
){kind=link}